Selecting Catalyst 9200, 9200L and 9300 access switches
Match endpoint ports, PoE demand and uplink capacity before choosing an access switch.
Match endpoint ports, PoE demand and uplink capacity before choosing an access switch.
Information to collect
Match endpoint ports, PoE demand and uplink capacity before choosing an access switch.
Provide the current host PID, software version, required interfaces and installation constraints before choosing replacements.
Selection checks
- Data-only 24T/48T ports do not supply PoE. Separate computers from phones and access points in the endpoint list.
- C9200, C9200L, C9300L and C9300 use different uplink and stacking combinations. Check the exact host and accessory identifiers.
- A modular uplink adds a choice of network modules; it does not include every module, transceiver or cable in the chassis price.
Before deployment
- Record the PID, installed power supplies and uplink modules.
- Test VLANs, link aggregation, failover and simultaneous PoE startup.
- Save the configuration, software version and per-unit acceptance record.
Preparing a quotation request
Include the exact part numbers, quantities, required condition, included accessories and software entitlements. Identify the target equipment and any unresolved interface or configuration item. A product association is not a validated combination.
Related products
Topic associations; verify the complete configuration before ordering.
- Cisco C9200-48P-E 48-Port Gigabit Access Switch
- Cisco C9200-24T-A 24-Port Gigabit Access Switch
- Cisco C9300-48P-A 48-Port Gigabit PoE+ Switch
- Cisco C9200L-24T-4G-E-RF 24-Port Gigabit Fixed-Uplink Switch
- Cisco C9200-24P-A 24-Port Gigabit Access Switch
- Cisco C9200L-48T-4G-E-RF 48-Port Gigabit Fixed-Uplink Switch
- Cisco C9300L-24T-4X-E 24-Port Gigabit Switch with Four 10G Uplinks
- Cisco C9200L-24T-4G-E 24-Port Gigabit Fixed-Uplink Switch